2016 Transport Graphics Outlaw Radial Rules

Transport Graphics Outlaw Radial 2016
Transport Graphics

www.tgwraps.com

Outlaw Radial 2016
Class Description:
The Small tire heads up challenge is a heads-up class designed for factory style door cars and trucks from any major OEM manufacturer.
Competitors will qualify on a .400 pro-tree alternating lanes
Eliminations will be an all run format on a Pro ladder.
Three qualifying rounds will be held prior to eliminations, must alternate lanes!
In order to compete in eliminations, a competitor must make at least 1 qualifying pass.

Permitted Tires:
Any radial tire up to a 315 (No Mickey Thompson 315 pro)
Slicks ok on small block N/A up to a 29.5×10.5 no “w”

Body:
Lexan front windshields door glass and rear windows will be allowed, as well as fiberglass replacement body panels.

Chassis/Suspension:
Front
Front suspension modifications are limited to bolt-in replacement components.
Factory front frame rails must be in stock, unaltered position.
Stock firewall must be retained and in stock location.
Minor notching for clearance of bell housing, distributor, supercharger or intercooler permitted.
Bolt-on replacement aftermarket front subframes are allowed for the 62-74 Chevy 2 / Nova, and the 67-81 Camaro / Firebird.
Rear
Stock type rear suspension or ladder bar rear suspension permitted.
Aftermarket 4-links are not allowed. Stock rear frame rails required.
Minor notching of outer portion of frame rails for tire clearance only permitted.
Inboard section of rear frame rails must remain stock, unaltered, and in factory location..
Aftermarket anti-roll bars and coil-overs permitted.
Wheelie bars are not allowed.
Max rim width is 12 inches.

Engine:
Any engine combination and power adders allowed.

Transmission:
Any OEM type automatic or manual transmissions allowed.
Manual transmissions must be clutch assisted (except naturally aspirated small block cars)
Aftermarket heavy-duty cases allowed.
Air shifters and trans-brakes are allowed.

Electrical:
Stock headlights and tail lights are required.

Tech:
Must pass all NHRA Safety Requirements including chassis certification and driver’s license requirements.

WEIGHTS: including driver
SB NA 2400
BB NA 2800
SB N20 2600
BB N20 3100
SB TURBO 3000
SB TWIN TURBO 3200
BB TURBO 3300
BB TWIN TURBO 3400
SB BLOWER 3200
BB BLOWER 3300
BB TWIN BLOWERS 3400
-ANY RADIAL OTHER THAN 275 ADD 100LBS
-DEDUCT 400 LBS OFF BASE FOR 4CYL
-DEDUCT 200 LBS BASE WEIGHT FOR 6 CYL
-DEDUCT 200 LBS FOR SERPENTINE DRIVEN SUPERCHARGERS

*4 AND 6 CYLINDER CARS allowed one nitrous nozzle in intake before throttle body.
All others not allowed to use nitrous with turbo or superchargers.